Note: Preference types are in bold print order number.
order number | description |
1120002277 | acryl glass crystal clear, for window 2.48 x 1.56 inch, no paint |
1120002532 | acryl glass crystal clear, for window 2.62 x 2.64 inch, no paint |
1120001513 | acryl glass crystal clear, for window 2.36 x 3.05 inch, no paint |
1120202277 | acryl glass crystal clear, for window 2.48 x 1.56 inch, painted for LCD 128 x 64 pixel |
1120102532 | acryl glass crystal clear, for window 2.62 x 2.64 inch, painted, for LCD 128 x 128 pixel |
1120101513 | acryl glass crystal clear, for window 2.36 x 3.05 inch, painted for TFT LCD 3,5”, ¼ VGA |
1120002279 | glue layer for acryl glass for window 2.48 x 1.56 inch |
1120001520 | glue layer for acryl glass for window 2.62 x 2.64 inch |
1120001521 | glue layer for acryl glass for window 2.36 x 3.05 inch |
0600102500 | membrane keyboard T25.11, 25 buttons, 4 x 6 matrix, 1 button extra, 4 colors, for window 2.48 x 1.56 inch and 2.62 x 2.64 inch |
0600101855 | membrane keyboard T28.11, 28 buttons, 4 x 7 matrix, 1 button extra, 4 colors, for window 2.48 x 1.56 inch and 2.62 x 2.64 inch, print down |
0600102051 | membrane keyboard T24.11, 24 buttons, 4 x 6 matrix, 1 button extra, 4 colors, for window 2.36 x 3.05 inch, print down |
printing is economically, as the tools are available | |
0600002500 | safety shutdown mat T25.10, 25 buttons, 4 x 6 matrix, 1 button extra |
0600001855 | safety shutdown mat T28.10, 28 buttons, 4 x 7 matrix, 1 button extra |
0600002051 | safety shutdown mat T24.10, 24 buttons, 4 x 6 matrix, 1 button extra |
9030008125 | foil direct plug, 11-pin, angled, raster 0.1 inch |
9030008126 | foil direct plug, 13-pin, angled, raster 0.1 inch |
9020006008 | spiral cable, 5 electrical lines, 6-pin MINI-DIN plug, screened, light gray |
9020007375 | spiral cable, 5 electrical lines, 6-pin MINI-DIN plug, screened, black |
9030007723 | JST-plug, 5-pin, angled, soldering execution, raster 0.06 inch, for spiral cable |
1120108131 | gasket kit |
9010006630 | belt fixing clip |
9010006640 | belt owner set, black (plastic clip, screws, and u-disk) |
9010109321 | belt owner set, light gray (plastic clip, screws, and u-disk) |
9030201217 | contact-set 1, gilded, o-ring and nut M2, in hand enclosure down, for table charging station |
9030301217 | contact-set 1, gilded, ( with 3 contacts) o-ring and nut M2, in hand enclosure down, for table charging station |
9030401217 | contact-set 1, gilded, ( with 5 contacts) o-ring and nut M2, in hand enclosure down, for table charging station |
9030101139 | contact-set 2, frame 1 light gray, printed circuit board gilded, countersunk screws for wall charging station ULW |
9030201139 | contact-set 2, frame 1 black, printed circuit board gilded, countersunk screws for wall charging station ULW |
1120001488 | cover, for narrow side below (spare cover), light gray |
1120001489 | cover, for narrow side below (spare cover), black |
1120001490 | cover, for narrow side above (spare cover), light gray |
1120001491 | cover, for narrow side above (spare cover), black |
1120001492 | cover, for narrow side right and left, light gray |
1120001493 | cover, for narrow side right and left, black |
1120001526 | cover above, with slot for check card (0.16 inch jutting), light gray |
1120001527 | cover above, with slot for check card (0.16 inch jutting), black |
1120002919 | cover above, light gray, with breach for enclosure SPA |
1120002920 | cover above, light gray, with breach for enclosure SPA |
1120001528 | frame, for window 2.36 x 3.05 inch, for LCD with touch panel, light gray |
1120001529 | frame, for window 2.36 x 3.05 inch, for LCD with touch panel, black |
1120002007 | adhesive layer for frame |
0650007048 | graphic LCD 128 x 64, no backlight |
0650008065 | graphic LCD 128 x 64, white backlight , fastening standard |
0650008066 | graphic LCD 128 x 64, RGB backlight, fastening standard |
9030007051 | FPC-plug, 30pin, top-contact, 0,5mm pitch, for FSTN graphic LCD from KM |
9030008127 | charging socket , 2-pin, angled for KM graphic LCD, for white backlight |
9030008128 | charging socket, 4-pin, angled for Km graphic LCD, for RGB backlight |
1120002055 | holding plate with screws for TFT-graphic-LCD 3,5”,z.B. HITATCHI |
on request | CapiSwitch enclosure system MEDIUM TAW |